(Al-Mg-Si Series) 5083 shipbuilding aluminum alloy Plate

-
5083 aluminum plate, with thickness more than 6mm and magnesium content between 4.0% - 4.9% by weight, belongs to high-magnesium and non-heat-treatable alloy, and has higher strength and lower formability than 5052 aluminum alloy.
 
Specification of 5083 aluminum sheet
1. Thickness: 0.15-600mm
2. Width: 500-2800mm
3. Length:500-16000mm
4. Temper:H16,H18,H19,H22,H24,H32,H111,H321,etc.
5. Certificate: DNV/ABS/Lioyds/BV
6. Feature: Corrosion resistance, high precision and fatigue resistance.
7. Tensile Strength：170～360MPa
8. Yield strength (MPa)≥65
9. Modulus of elasticity(E): 69.3～70.7Gpa

 
Applications of 5083 aluminum alloy plates:
1. Shipbuilding: yachts, patrol ships, cargo ships, workboats, fishboats etc.
2. Presure vessels, storage tanks.
3. Vehicle bodies:metro train, tip truck and tank truck bodies etc.
4. Aluminum armor, aircraft welding parts.
 
 

The performance of 5083 aluminum sheet
1. Corrosion Resistance
The typical application of 5083 is in the marine environment. with more than 3½% mg Mg content, it can be susceptible to stress corrosion cracking, which limits its application temperature to below 65°C and also limits the amount of cold work to ¼ Hard.

2. Heat Treatment
The 5083 can not be harden by heat treatment. It can be significantly hardened by cold work (cold rolling) and various “H”tempers are produced – most commonly H32 (¼ Hard) or the similar strength marine tempers H116 and H321 – as well as the soft annealed Temper O condition.

3. Welding
It can be Excellent weld-ability by all standard electric, GMAW and GTAW are preferred and widely used to produce structural welds.
 
 Contact: 
 

E-Mail: sales@mingtai-al.com 

Ph|WhatsApp|Wechat: 0086-17760728273

Web: https://m.mingtai-al.com/

 

评论

发表评论

此博客中的热门博文

6063 Alloy for Aluminum Pontoon Boat

-
图片
 A pontoon boat is a flat boat that relies on floats to maintain buoyancy. These pontoons (also called tubes) contain large amounts of reserve buoyancy, allowing designers to plan spacious seating areas, stand-up bars, sun pads and various other amenities such as large decks. A pontoon boat has a shallow draft of about 8 inches (20 cm), which reduces the risk of running aground or being damaged in the water and allows you to access your luggage closer to shore. Aluminum pontoon boat refers to a new type of floating bridge made of  6063 aluminum alloy . The surface has been scientifically treated to enhance the frame's antioxidant and corrosion resistance. Aluminum pontoon boats offer high strength, ease of assembly, modern colors and durability. Aluminum alloy pontoon bridge is divided into main pontoon bridge and branch pontoon bridge. Aluminum profiles are specially designed for marine environments, have very good corrosion resistance, are suitable for rivers, lakes an...
阅读全文

3003 aluminum sheet for radiator water tanks

-
图片
  With the increasing energy density and power density of the power batteries in new energy vehicles, the battery charge and discharge rates are higher, leading to increased heat generation. Traditional cooling methods such as natural cooling or air cooling are no longer sufficient to meet the requirements. Water cooling has gradually become the mainstream cooling method. The water cooling plate is an important component of the cooling management system for power batteries in new energy vehicles, effectively cooling and protecting the batteries. The water cooling plate for power batteries in new energy vehicles has excellent performance using 3003 aluminum alloy sheet. The main element in  3003 aluminum sheet  is manganese, which provides excellent corrosion resistance. It is lightweight and has high formability for stamping. It has excellent processing properties and good weldability. It exhibits good resistance to corrosion and oxidation, high toughness, avoids deformat...
阅读全文

2018 hot sales 6063 aluminum alloy sheet/coil price in mexico

-
The description of 6063 aluminum coil: 6063 aluminum volume of main alloying elements as magnesium and silicon, has excellent processing properties, extrusion and electroplating, good corrosion resistance, toughness, easy polishing, color film, the effect of anodic oxidation is excellent, extruded alloy typical. 6063 Aluminum Alloy profile with its moderate plasticity, good heat treatment strength, good welding performance and anodized surface gorgeous color is widely used in building materials, irrigation pipe etc. The features of 6063 aluminum coil : 1,Excellent processing performance, excellent welding characteristics and electroplating; 2,Good corrosion resistance, high toughness and deformation after processing; 3,Material dense without defects; 4,Easy to polish, easy to color film; 5,Excellent oxidation. The specification of 6063 alu coil : Temper:O, T4, T6, T651 Thickness:0.15-600mm Width: 100-2600mm Length: 500-16000 The application of 6063 aluminum alloy : It ...
阅读全文